Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 97
Tap each network service to be enabled or disabled then tap the Enable
or Disable icon.
There are 7 services that can be disabled (enabled by default):
 SSH – Disabling this will block Secure Shell (SSH) traffic.
 Telnet – Disabling this will block Telnet traffic.
 HTTP – Disabling this will block web browser connections to the
Falcon-NEO.
 CIFS/NETBIOS – Disabling this will block any CIFS or NETBIOS
connection to the Falcon-NEO (for example, Windows Explorer).
 iSCSI – Disabling this will block any iSCSI (Internet SCSI) traffic.
 Iperf – Disabling this will block Iperf traffic (a network tool to
measure bandwidth performance).
 Ping – Disabling this will block ping access to the Falcon-NEO.
Disabling any of the services above will disallow the types of
communication controlled by those services. For example, if HTTP is
disabled, users will not be able to see the Falcon-NEO through a web
browser over the network.
Please contact your Network or
Systems Administrator before
changing any of these services.
5.11.2 HTTP Proxy
If the network the Falcon-NEO is connected to uses an HTTP proxy server to access the
Internet, proxy settings may need to be set for the Falcon-NEO to be able to update
software from a network (over the internet). This typically includes a server (or IP address),
a host port, a username and password.
5.11.2.1 Server
Tap the Server icon to set the IP address (or server name) and port of the
proxy server.
5.11.2.2 Username/Password
If the proxy server requires a username and password for authentication,
tap the Username/Password icon to set this information.
5.12 Software Update

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English