Logicube Falcon-NEO User Manual

Logicube Falcon
®
-NEO User’s Manual 55
5: Types of Operations
5.0 Types of Operations - Introduction
There are thirteen (13) types of operation available on the Falcon-NEO. The left side of the screen shows
the different operation types that can be set. Detailed information on all the different operations and their
screens can be found in this section.
1. IMAGING – Performs an image from a Source to a Destination. There are six modes available:
 Drive to File – Images the Source to any of the following image output file formats: DD,
E01, EX01, or DMG.
 File to File (Targeted Imaging feature) – Create logical images by using preset filters,
custom filters, files signatures filter, and/or keywords search function to select and
acquire only the specific files needed. Output formats available are: LX01, ZIP or directory
tree. Optionally an MFT report can be generated, which contains a list of deleted files (if
present) that can potentially be restored or recovered.
 Partition to File (Logical Imaging) – Images one partition from the Source drive to any
of the following image output file formats: DD, E01, or EX01. Compression is available for
E01 and EX01 formats. Also allows BitLocker decryption (requires the BitLocker password)
so the image file(s) created will not have encrypted data. Since BitLocker encrypts
volumes, and a volume is a formatted partition, unlocking the BitLocker encrypted
volume requires going through the Partition to File mode.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English