Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 69
5.4 Push
The network Push feature gives users the ability to push Falcon-NEO created evidence
files from drives connected to the Falcon-NEO or from a Falcon-NEO repository to a
network location or a Destination drive connected to the Falcon-NEO. The Push feature
provides a more secure method than simply copying and pasting to the analysis
computer by performing an MD5 or SHA hash during the push process. Users can also select to verify the
file transfer to ensure data integrity. The Falcon-NEO will create a log file for each push process.
There are three selections when performing a push:
 Source
 Settings
 Destination
To push files to a network location, a network
repository must be set up. Details on how to
add a repository can be found in Section 5.9.1.
5.4.1 Source
Tap this icon to select the drive or repository where the files are to be pushed from
(where the files to push are located).
After selecting the Source, a list of cases found on the drive will be displayed. Select one
or more cases to push then tap the OK button to continue. If no cases are selected, all
cases found on the drive or repository will be pushed.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English