Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 89
 Hash/Verify – A hash task can be started, but
no settings can be changed. Additionally, no
new task can be added, and no task can be
deleted without the Config lock unlock key.
 Wipe/Format – A wipe task can be started, but
no settings can be changed. Additionally, no
new task can be added, and no task can be
deleted without the Config lock unlock key.
 Push – A push task can be started but no
settings can be changed. Additionally, no new
task can be added, and no task can be deleted
without the Config lock unlock key.
 Task Macro – A task macro can be started, but
no settings can be changed. Additionally, no
new macro can be set or edited without the
unlock key.
 File Browser – The file browser cannot be
accessed without the Config lock unlock key.
 Logs – Logs are not affected by Config Lock.
 Statistics – Since there are no settings or
configurations for this operation, it is not
affected by Config Lock.
 Manage Repositories – A managed repository
cannot be added, edited, or deleted without the
Config lock unlock key.
 System Settings – This entire section cannot be
accessed without the Config lock unlock key.
 Network Settings – This entire section cannot
be accessed without the Config lock unlock key.
 Software Updates – This entire section cannot
be accessed without the Config lock unlock key.
 Power Off – This entire section cannot be
accessed without the Config lock unlock key.
The Falcon-NEO can still be
turned off without the
unlock key by using the
power button located on
the top of the Falcon-NEO.
5.10.2.1.2 Forgotten password for any keys
If any of the keys is forgotten, the INITIAL.DB profile will
need to be loaded using the Command Line Interface

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English