Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 60
5.2.2 Drives
Tap this icon to choose the drive to be hashed or the drive that contains the case (image)
files to be verified.
When Drive Hash mode is selected, all connected drives will be shown.
When Verify mode is selected, only Destination drives with cases (images) created by the
Falcon-NEO will be shown.
5.2.3 Settings
Tap this icon to choose a drive to adjust the hash or verify settings.
5.2.3.1 Drive Hash Settings
If Drive Hash mode was chosen, the Hash Settings screen will appear:
Tap the Hash Values icon to set the hash method (SHA-1, SHA-256, or
MD5) and to set the expected hash value (if desired). Setting the
expected hash value instructs the Falcon-NEO to hash the drive then
verify the hash with the expected value set.
Each hash task is Logical Block Address (LBA)
based and will hash drives based on the number
of LBAs. If multiple drives are selected to be
hashed, the Falcon-NEO will hash up to the LBA
value of the smallest capacity drive. If drives with
different capacities need to be hashed, it is
recommended to start one task per drive.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English