Logicube Falcon-NEO User Manual

QUICK START
Logicube Falcon
®
-Neo User’s Manual 23
3.1.7 Drive Spanning
The Falcon-NEO can automatically span to two (or more) Destination drives when using
Drive to File, File to File, Partition to File, or Net Traffic to File mode (DD, E01, EX01,
or DMG).
For When the task is started, and there may not be enough space on the Destination
drive, the following prompt will appear warning that there might not have sufficient free
space on the Destination drive:
When the Destination drive is full and the remaining data to be will not fit, Falcon-NEO
will prompt for another drive.
When the screen above appears, tap the OK icon and the Select Repository screen will
appear. The Destination drive that is full can be disconnected, and replaced with another
drive, or a different Destination drive port or repository can be selected. After selecting
the next Destination/Repository to be used, tap the OK icon.
When the imaging operation is finished, all subsequent
Destinations/Repositories used will contain the same
Case/File name and the next DD, E01, EX01, or DMG file. For
example, if the last file on the first Destination used is *.E23,
the next Destination/Repository used will start with file *.E24.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English