Logicube Falcon-NEO User Manual

QUICK START
Logicube Falcon
®
-Neo User’s Manual 17
3.1.1 Step-By-Step Instructions – Imaging
Details on each selectable option
on the Image screen can be
found in Chapter 4: Imaging.
1. Select Imaging from the types of operation on the left side.
2. Tap the Mode icon and select one of the six modes then tap the OK icon.
3. Tap the Source icon and choose the source from the list of connected drives then
tap the OK icon.
4. Tap the Settings icon and adjust the settings as needed (Case Info, File Image
Method Settings or Mirror Settings, HPA/DCO/ACS3/TRIM, Error Handling,
Hash/Verification Method, etc.) then tap the OK icon.
 The Settings screen will be different for each of
the two modes. Details on the different Settings
screens can be found in Chapter 4: Imaging.
 Log file names can be set in Settings in the Case
Info screen by entering a Case/File name. See
Section 4.3.1 for more information.
The Falcon-NEO will convert any non-POSIX portable
characters used in Case/File Name field to
underscores (_) when creating the log or file names.
POSIX portable characters are:
Uppercase A to Z Period (.)
Lowercase a to z Underscore (_)
Numbers 0 to 9 Hyphen/Dash (-)
5. Tap the Destination icon and select the destination(s) to be used then tap the
OK icon.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English