Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 63
5.2.4 Case Info
The Case Info setting allows users to enter some information about the case. Case Info
and is not required to start a Hash or Verify operation.
Information entered here will appear in the logs. More information on the Case Info
screen can be found in Section 4.3.1.
5.3 Wipe / Format
This type of operation allows the user to erase, wipe, and/or format one or more
Destination drives. There are three main settings: Secure Erase, Wipe Mode, and Format.
 Secure Erase – Sends a command to the drive instructing it to perform a secure erase based on
the drive manufacturer’s specifications for the secure erase command.
Secure erase will not work on
drives connected through the
USB or PCIe ports.
 Wipe Patterns – Allows the user to set a specific pattern to use for wiping the drive. The number
of passes is customizable (up to 7 passes) along with the type of data written for each pass. In
addition, a 7-pass DoD wipe can be set with pre-selected pass values. The Falcon-NEO can verify
each pass value through a setting. Any HPA, DCO, or ACS3 can be unlocked and wiped in these
settings.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English