IMAGING
Logicube Falcon
®
-Neo User’s Manual 42
RESTORING A TRIMMED DRIVE – To restore a trimmed drive to its
original capacity, perform a custom wipe (single pass) and set the WIPE
DCO and WIPE HPA settings to YES.
IN THE WIPE SETTINGS:
- Set Secure Erase to OFF
- Set Wipe Patterns to:
Mode: Custom
HPA/DCO/ACS3/TRIM: YES (TRUE)
LBAS: Edit to at least 1 LBA
PASSES: By default, this will have a value of 00
To set the LBA to 1, go to LBAS then tap the edit icon and enter the
value: 1
To Next Page
Loading...