LR Suprasorb CNP P3 - Page 129

129
Proceed as follows:
1. Remove the exudate pouch from the packaging and extend completely.


2. Insert the exudate pouch loosely into
thereusable container. During insertion,
ensure that the pouch film is inserted
intothe container completely and
isnottrapped at the edges.

3. Now promptly affix the container system
(Suprasorb
®
CNP Container with inserted
Suprasorb
®
CNP Exudate Pouch) to the
main unit and as shown in the diagram
until it clicks into place completely and
issecurely connected.
4. The connection to the wound drainage system can now be established on the exudate
pouch tube. This can be done using either the Suprasorb
®
CNP Drainage Pad or the
Suprasorb
®
CNP Deep Drain, each with the corresponding connector.
See also instructions for use for Suprasorb
®
CNP Drainage Pad; points f, g and h of
theapplication instructions.