LR Suprasorb CNP P3 User Manual

4.3 Start screen
The start screen appears
forafew seconds when
theunit is switched on.
4.4 Preset therapy mode
The preset therapy mode
appears after the start
screen; the therapy
isstopped.
4.5 Changing settings
The screen of the Suprasorb
®
CNP P3 is
atouchscreen. The following changes can be
made here by simply touching the symbols in
the two toolbars (see red marking in image of
screens at end of Section 4.5):
Start of therapy
The therapy mode must
onlybeset by qualified
healthcare professionals!
General settings
Locking function

4.6 Setting the therapy mode
Selecting takes you
tothe following screen:
You can cancel the
action by pressing
orconfirm your selection
by holding
down for
3seconds to proceed to
thetherapy settings menu.

Choose one of the two
therapy modes by selecting
the corresponding view –
Continuous or Intermittent–
using
. The values
are set in intervals of 5
forthe pressure and
30seconds for the time.

LR Suprasorb CNP P3 Specifications

General

Brand	LR
Model	Suprasorb CNP P3
Category	Medical Equipment
Language	English