Not only the pressure and time but also
thesensitivity need to be set. You can
choosebetween “High”, “Medium”,
“Low”and“Minimal” for this parameter
onthe“Therapy” screen.
The sensitivity determines how sensitively
thetherapy unit reacts to pressure fluctuations
and how fast amessage requiring attention
appears on the screen. In the “High” setting,
this message appears particularly quickly;
inthe case of “Minimal”, the delay is
considerably longer.
4.8 Confirming the therapy setting
Once the setting reflects the desired therapy,
confirm with
.
You are automatically returned to the therapy
screen, where you can now see the selected
therapy settings. If you do not wish to make
any changes to the therapy settings, you can
return with
.
In this example, the
“Continuous” therapy mode
is selected, the negative
pressure set to -80mmHg
and the sensitivity set
to“Medium”.