Introduction
This instruction describes the unloading, setup, and predelivery requirements for the MacDon R113 and R116 Rotary Disc
Pull-Type.
To ensure your customers receive all of the performance and safety benefits from this product, carefully follow the
unloading and assembly procedure from the beginning through to completion.
Retain this instruction for future reference.
Carefully read all the material provided before attempting to unload, assemble, or use the machine.
If the shipment is damaged or is missing parts, contact shortageanddamage@macdon.com.
Conventions
The following conventions are followed in this document:
• Right and left are determined from the operator’s position, facing the direction of travel.
• Unless otherwise noted, use the standard torque values provided in this manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our website
(www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required).
This instruction is available in English and French.
215585 i Revision A
To Next Page
Loading...
