T-324
Error code [EO105L] Control power supply Lo-error
Error code EO105L
Details of
failure
Control power supply Lo-error
Failure-determining
conditions
Short circuit to power supply line detected (when output is OFF).
Assumed cause and
diagnostic method
Cause Diagnostic method and action to be taken
1
Harness short circuit to
power suppl
line
Check the related circuits for any short circuit to ground.
2 Lower controller fault Replace the lower controller
[Location information] For locations, refer to T-308 (lower controller), 316 (joystick), 347 (relay), 352 (pressure sensor)
[Related electric circuits]