T-326
Error code [EO107L] Fly jib switching relay Lo-error
Error code EO107L
Details of
failure
Fly jib switching relay Lo-error
Failure-determining
conditions
Short circuit to power supply line detected (when output is OFF).
Assumed cause and
diagnostic method
Cause Diagnostic method and action to be taken
1
Harness short circuit to
power supply line
Check the related circuits for any short circuit to ground.
2 Fly jib switching relay fault Check if the fly jib switching relay (RYF1) functions properly
[Related electric circuits]
[Location information]
To Next Page
