T-401
1.2 TROUBLESHOOTING (MATTERS OTHER THAN ERROR CODE
DISPLAY)
If any error cord is displayed on the monitor, prioritize the diagnosis and countermeasures for it.
No. Symptom Page
1. Troubleshooting of the engine body T-403
S-1 Engine start fault T-403
S-2 Engine stall T-404
S-3 Engine hunting T-405
S-4 Engine output shortage T-406
S-5 Much white smoke in exhaust gas T-407
S-6 Much black smoke in exhaust gas T-407
S-7 Abnormal noise from engine T-408
S-8 Significant fuel consumption T-408
S-9 Significant oil consumption T-408
2. Troubleshooting of the electrical systems T-409
E-1 Monitor displays nothing T-409
E-2 Monitor frozen and inoperable T-410
E-3 Monitor switches inoperable (except for being frozen) T-410
E-4 Moment limiter indication values on monitor are questionable T-410
E-5 Fuel gauge fails to indicate normally T-411
E-6 Monitor does not display partially T-411
E-7 Screen does not switch to service mode T-412
E-8 Engine does not start (no engine-related error code displayed) T-412
E-9 Glow lamp does not function T-413
E-10 Headlights do not turn on normally T-413
E-11 Tri-colour revolving working status lamp does not come ON T-413
E-12 Rear view camera shows nothing. T-414
E-13 None of all the working machines and the slewing/travelling works T-414
E-14 Travelling speed cannot be changed T-414
E-15 High speed operation of winch wind-up/down cannot be performed T-415
E-16 Wind-up cannot be performed with hook stowage operation T-415
E-17
Wind-up, extension, raising or lowering operations cannot be
performed even when the moment limiter is cancelled with the override
switch
T-416
To Next Page
Loading...
