3-12
displayed was used in a
recent position fix.
Refer to page 5-3 for more detail.
Satellite Schedule
Until the global positioning system is complete, you may not be able to
use the unit 24 hours a day in all locations. The Satellite Schedule
computes the windows in which enough satellites will be available to
take a position fix, given the location and date you enter, and the
current mode (2D or 3D).
Press AUX, 4, and
ENTER.
Press the RIGHT ARROW
to choose a position. You
may choose from last fix,
initial position, and
waypoints.
When the position you
want is displayed, press
ENTER. Enter the date you
want the schedule for, then
press ENTER.
OR
Press ENTER to accept
the current date.
To Next Page
Loading...
Need help?
General