Magellan NAV 5000 - Choosing Lat;Lon Display

4-34
To select automatic or manual route mode, use the key sequences
below. (Default is Automatic.)
From the initial time
display, press the DOWN
ARROW.
Press the RIGHT ARROW
to toggle between
automatic and manual
modes.
Use the RIGHT ARROW to
toggle between Deg/Min
and Deg/Min/Sec.
Choosing Lat/Lon Display
The latitude and longitude can be displayed in degrees and minutes
( DEG/MIN) or in degrees/minutes/seconds (DEG/MIN/SEC). (Default is
DEG/MIN.)
From the route mode
display, press the DOWN
ARROW.