Magellan NAV 5000 - Viewing an Existing Route; Resetting a Route; Route Modes

When all of the route legs
have been set, press
ENTER twice. The screen
goes to leg 1 of the route
you just created.
To view the route you just
created, press ROUTE and
use the RIGHT ARROW to
scroll through the legs.
Press NAV, POS, or VEL
to display navigation data
relative to the route leg and
destination.
4-22
Viewing an Existing Route
Resetting a Route
Routes can be reset by pressing the ROUTE key, selecting a new leg,
then pressing POS, NAV, or VEL. You can also enter a new route,
select a leg, then press POS, NAV, or VEL.
Route Modes
The automatic and manual modes are selected with the SETUP key.