Automatic Mode
4-24
Imagine that a line inter-
sects the destination
waypoint and is perpen-
dicular to the courseline.
(See the Illustration on
page 4-19.) When you
cross that line, the unit
automatically switches to
the next leg of the route.
When a route is being
followed in the automatic
mode, press the NAV key
after selecting the current
leg. This displays naviga-
tion data for the current
leg. (See NAV, page 4-4.)
lf you are 9.99 nautical
miles or more from your
courseline, the unit cannot
compute a cross track
error and the invalid leg
message appears. Clear
the
message by choosing
a more appropriate leg or
by clearing the route
completely.
When you are within 500
feet (152.4 meters) of your
destination, "CLOSE"
appears on the bottom line.
To Next Page
Loading...
