Press VEL to obtain speed
and ground course
information.
3-7
When all of the legs have
been entered, press
ENTER twice. The display
returns to the first leg.
For more detail, refer to Route in Chapter 4, starting at page 4-18.
GETTING VELOCITY
Velocity information is available only in continuous operation, and only
when your speed exceeds 0.2 knots.
For more detail, refer to page 4-41.
GETTING NAVIGATION DATA
The unit can obtain navigation data only when a route has been set.
Navigation data available includes Bearing, Distance to destination,
Steering, Time To Go, and Cross Track Error data.
Press NAV to navigate to
your first destination. NAV
data is shown an four
display screens. The first
shows Bearing, Distance to
destination waypoint,
To Next Page
Loading...
Need help?
General