Magellan NAV 5000 - Viewing Stored Waypoints

4-46
Key in the altitude. Use the
RIGHT ARROW to toggle
between positive and
negative values (above
and below sea level).
Press ENTER.
Press ENTER again to
store this information.
When ENTER has been
pressed, the DOWN
ARROW appears on the
display.
lf this message appears,
there is no room to store
another waypoint. You
must delete a waypoint
before another can be
stored. See "Clearing
Waypoints" below.
Viewing Stored Waypoints
Use the following key sequence to access and view a waypoint.
Press the WPT key.