Magellan NAV 5000 - Page 90

4-43
If the name you chose is
already being used, this
message appears. Press
ENTER and key in another
name.
Name the waypoint. Enter
one to six characters as
described in "Entering
Data" on page 2-14. Press
ENTER.
OR
Press ENTER to name the
waypoint automatically.
If you do not choose a
name for the waypoint, the
NAV 5000 generates one.
Unit-generated names are
in the format WPTxxx,
where xxx represents
numbers 001 through 099.
Waypoints are numbered
in sequence.