Mahr Millimar C 1202 - Initial Operation; Powering On and Basic Configuration

17
Mahr GmbH • Millimar C1202
2 Initial operation
2.1 Switching ON
– Connect the mains adapter to the
measuring instrument and mains
socket
– Press the ON / OFF key
=> The following appears on the display:
Start screen
2.3 Setting the measurement unit
– Select the relevant measuring unit
with ▼ or ▲
– Conrm entry by pressing key 4
2.2 Selecting the display language
– Select the relevant language with ▼
or ▲
– Conrm entry by pressing key 4