Mahr Millimar C 1202 - Master Measurement Mode

49
Mahr GmbH • Millimar C1202
5.1.4 Master measurement mode
– Select the Master measurement
submenu using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Use the ▲ or ▼ key to select Master
measurement mode.
Manual:
Master measurement is performed
for the feature at which the hand is
pointing.
Sequential:
Master measurement is performed
for the feature at which the
hand is pointing. Hand switches
automatically to next feature.
Parallel:
Master measurement is performed
for all active features at the same
time.
– Select using 4 key or exit submenu
using the Ó key.
Use the
key to switch to
measuring mode.