Mahr Millimar C 1202 - Unit Length; Unit Angle

48
Mahr GmbH • Millimar C1202
5.1.2 Unit length
– Select the Unit length submenu
using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Use the ▲ or ▼ key to select the
relevant unit.
– Use the 4 key to conrm the
selection or Ó to exit the submenu.
Use the
key to switch to
measuring mode.
5.1.3 Unit angle
– Select the Unit angle submenu using
the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Use the ▲ or ▼ key to select the
relevant unit .
– Use the 4 key to conrm the
selection or Ó to exit the submenu.
Use the
key to switch to
measuring mode.