Mahr Millimar C 1202 - Resolution; Length Resolution

41
Mahr GmbH • Millimar C1202
3.2.6 Resolution
You can select the resolution for the
measuring value display according to the
function in the formula.
Resolution length for function (x, Max, Min,
(Max+Min)/2, average, Max-Min)
Resolution angle for function (atan)
– Press the ON/OFF key
=> Menu appears.
– Use the Ó key,
▼
or
▼
and to
select the Feature (M1 / M2 / M3)
you wish to congure.
3.2.6.1 Resolution length
– Select the Resolution length
submenu using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Use the ▲ or ▼ key to select the
relevant resolution.
– Use the 4 key to conrm the
selection or Ó to exit the submenu.
Use the
key to switch to
measuring mode.