Mahr Millimar C 1202 - Setup 2; Foot Switch (Switching Input)

51
Mahr GmbH • Millimar C1202
5.2 Setup 2
– Press the ON/OFF key
=> Menu appears.
– Press Ó,
▼
or
▼
and to select
Setup 2.
5.2.1 Foot switch (switching input)
– Select the Foot switch submenu
using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
Make the switching input function
active:
– Use the ▲ or ▼ key to select the
function and activate with the
key.
You can only select functions that
are available on the basis of the
current settings. The other functions
are grayed out.
Make switching input function
passive:
– Use the ▲ or ▼ key to select the
function and deactivate with the
key.