Mahr Millimar C 1202 - Factory Settings

72
Mahr GmbH • Millimar C1202
6.1.3 Factory settings
– Select the Factory settings submenu
using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Select action with ▼ or ▲ key.
No = cancel
!
Yes = instrument is reset to
factory settings.
– Select using 4 key or exit submenu
using the Ó key.
Progress is indicated by a green
progress bar.
At the end of the process, the C1202
restarts. The start screen appears
briey. The language and unit of
measurement need to be selected.
See also initial commissioning,
Section 2.