Mahr Millimar C 1202 - Factor

23
Mahr GmbH • Millimar C1202
3.2.1.1 Factor
– Use the 4 key to select the Factor
submenu.
– Use the
▼
key to select the digit and
the ▼ or ▲ key to enter the relevant
value.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
– Use
▼
to select Function or ▲ or Ó
to nish editing the formula and
to accept changes or Ó to exit the
formula editor without applying the
changes.
If a value is changed but the
change has not yet been saved, the
"Formula" text appears in gray. The
changed formula can only be saved
when the row with "Formula" appears
in red.