Mahr Millimar C 1202 - Setup and System Configuration; Setup 1: Basic Settings

47
Mahr GmbH • Millimar C1202
– Use the 4 key to conrm the
selection or Ó to exit the submenu.
– Use the
key to switch to
measuring mode.
5 Setup
5.1 Setup 1
– Press the ON/OFF key
=> Menu appears.
– Press Ó,
▼
or
▼
and to select
Setup 1.
5.1.1 Feature selection
– Select the Feature selection
submenu using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
– Make feature active:
Use the ▲ or ▼ key to select the
feature and activate with the
key.
– Make feature passive:
Use the ▲ or ▼ key to select the
feature and deactivate with the
key.
– Use the 4 key to conrm the
selection or the Ó key to exit the
submenu.