64
Mahr GmbH • Millimar C1202
6.1.2 Calibration
– Select the Calibration submenu
using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
6.1.2.1 Calibration C1
– Select the Calibration C1 submenu
using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
6.1.2.1.1 Customer calibration activation
If a customer calibration is already
available, it can be activated by
selecting this menu item.
– Select Customer calibration
activation using the ▼ or ▲ key.
– Select using 4 key or exit submenu
using the Ó key.
The active correction for the
measuring channel is displayed
under Calibration in the menu.
C1: Customer calibration
C2: Factory calibration
To Next Page
Loading...
