Mahr Millimar C 1202 - Tolerance and Warning Limits

35
Mahr GmbH • Millimar C1202
3.2.4 Tolerance
– Press the ON/OFF key
=> Menu appears.
– Use the Ó key, ▼ or and to
select the Feature (M1 / M2 / M3)
you wish to congure.
– Select the Tolerance submenu using
the ▼ or ▲ key.
– Select using 4 key or exit submenu
using Ó key.
– Press ▼ to activate the tolerance
evaluation
– Press ▼ to edit the values for Lower
value and Upper value.
– Use the 4 key to select the Lower
value submenu.