Mahr Millimar C 1202 - Page 52

52
Mahr GmbH • Millimar C1202
You can make several functions
active. The functions will then be
processed automatically in the
logical order.In the example on the
left, "Send data", "Start" and "Stop"
are active functions of the foot
switch. The rst time you press the
foot switch, the measurement will
start. The second time you press the
foot switch, the measurement will
stop and the measured value will be
sent via the interface.
– Use the 4 key to conrm the
selection or Ó to exit the submenu.
– Use the
key to switch to
measuring mode.