Mahr Millimar C 1202 - Page 40

40
Mahr GmbH • Millimar C1202
If a warning limit is changed but
the change has not yet been saved,
the "Warning limits" text appears in
gray. The changed warning limits
can only be saved when the row with
"On" or "Off" appears in red.
– Use the
▼
key to select the digit and
the ▼ or ▲ key to enter the relevant
value.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
– Use
▼
to select Lower value or ▲ or
Ó to nish editing the Warning limits
and
to accept changes or Ó to
exit the Warning limits Editor without
applying the changes.
– Use the
key to switch to
measuring mode
or Ó to exit the Feature submenu
or 4 to edit the Warning limits
or ▼, ▲ to scroll through the
submenu.