Mahr Millimar C 1202 - Page 39

39
Mahr GmbH • Millimar C1202
Values for the lower value and the
upper value must be entered relative
to the nominal size.
If a greater number is entered for the
lower value than for the upper value,
the numbers will appear in yellow.
The entries cannot be saved.
– Use the
▼
key to select the digit and
the ▼ or ▲ key to enter the relevant
value.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
– Use
▼
to select Upper value
or ▲ or Ó to nish editing Warning
limits
and to accept changes or Ó to
exit the Warning limits Editor without
applying the changes.
– Use the 4 key to select the Upper
value submenu.