33
Mahr GmbH • Millimar C1202
– Use
▼
to select Min master or the ▲
or Ó key to nish editing Formula
and to accept changes or Ó
to exit the Formula Editor without
applying the changes.
If a value is changed but the change
has not yet been saved, the "Master"
text appears in gray. The changed
master values can only be saved
when the row with "Master" appears
in red.
– Use the key to switch to
measuring mode or Ó to exit the
Feature submenu or 4 to edit the
master or ▼, ▲ to scroll through the
submenu.
If a greater number is entered for
Min master than for Max master,
thenumbers will appear in yellow.
The entries cannot be saved.
To Next Page
Loading...
Need help?
General
