55
Mahr GmbH • Millimar C1202
Automatic:
A measurement is started by
pressing the key. The C 1202 then
begins recording measuring values
and calculates the formula for the
active features based on the formula.
Pressing the
key ends the
measurement and displays the
results. The measurement recording
then switches off. The recording of
measurements can be paused with
the key (pause) and resumed with
the key. This is helpful, e.g. for
radial runout measurements with a
discontinuous prole.
As long as a measuring routine is
active, a green bar is displayed in the
center box.
Measurement started
Ready to measure, measurement
value display frozen
To Next Page
Loading...
Need help?
General
