Mahr Millimar C 1202 - Page 66

66
Mahr GmbH • Millimar C1202
– Use the
▼
key to select the digit and
the ▼ or ▲ key to enter the relevant
value.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
– Use
▼
to select the value for
Calibration max and enter the
relevant value as explained above.
– To execute the customer calibration,
use the ▼ key to select Perform
customer calibration.
– Use the 4 key to conrm the value or
Ó to exit the submenu.
The display shows information on
how to position the probe.
– Use the 4 key to conrm the value or
Ó to cancel the process.
Progress of the measurement is
indicated by a green progress bar.