Mahr Millimar C 1202 - Page 78

78
Mahr GmbH • Millimar C1202
Saving parameters
– Press the
key. The most
up-to-date parameters are saved to
the Micro SD card as a new le.
– Enter the name for the parameter le.
Use the
▼
key to select the digit and
the ▼ or ▲ key to enter the relevant
characters.
Any six characters can be assigned
as the name. A consecutive 2-digit
number is added automatically.
Possible characters (a…z, 0…9, -, _)
– Press 4 to save parameters, or Ó to
cancel the entries.
Loading parameters
– Press ▼ or ▲ to select the
parameter le, or Ó to exit the
submenu.
– Conrm selection by pressing key 4
– Press 4 to load the parameter le or
Ó to cancel the process.