Maintenance overview
5.2 Maintenance plans
25.11.2016
Maintenance manual 3 302 364 en 5 - 3
GMK 4100L-1
5.2 Maintenance plans
The descriptions of specific maintenance work in the maintenance
plans D, W, M 1 to M 12 and Y 2 to Y 10 have been provided for
– the carrier in Chapter 7 and for
– the superstructure in Chapter 8.
References (chapter and page number) to the description of this maintenance
work can be found
after the respecti
ve maintenance work for carrier and
superstructure.
The section titles
– of Chapter 7 Maintenance work on the carrier and
– of Chapter 8
Maintenance work on the superstructure
contain the abbreviations (D to Y 10) of the relevant maintenance plan for
better comprehension.
In addition to the Maintenance work on the carrier and the Maintenance
work on the superstructure Chapter 6 also lists the Lubricants and
consumables:
– The designations of the oils/lubricants in accordance with Lubricants list,
p. 6 - 2.
– The amounts as
approximate values for oil amounts in litres (ltr) (and US
gallons (gal)) (the exact oil amounts can always be determined by the oil
level inspection holes, the oil dipsticks or the oil level indicators)
Lubricant
applications list
, p. 6 - 3.
H
Items that are only available with additional equipment are designated
accordingly in Chapter 7 and Chapter 8.
H
Maintenance work on the engines over and above the daily and weekly
checks is only partially described in this maintenance manual. When
carrying out such maintenance work, follow the instructions given in
the
Engine manufacturer’s documentation.
To Next Page
Loading...
Need help?
General
