Manitowoc Grove GMK 4100L-1 User Manual

Maintenance work on the carrier
7.13 Steering
7 - 90 3 302 364 en Maintenance manual
GMK 4100L-1
25.11.2016
7.13.2 Checking the angle sensors
Prerequisites – The truck crane must be raised on outriggers or parked over an
inspection pit.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Checking
Angle sensor
There ar
e five angle sensors mounted on
various axle lines:
• If necessary, clean the bracket (1), the angle
sensors (2), and the linkage (3).
• Check that all bolts on the bracket are
securely seated.
• Check the linkage for deformation and
damage.
Steering computer
There are two steering computers fitted:
• Do not press the button (2) – only the
qualified repair crew are authorised to
do this.
• Use only a cloth to clean the steering
computer (1).
• Check the steering computer and the
displays for external damage.
If you find damage to the angle sensors or steering computers
• Immediately notify Manitowoc Crane Care or an authorised GROVE dealer.
1. axle line right and left
3. axle line right
4. axle line right and left
4. axle line right and left

Manitowoc Grove GMK 4100L-1 Specifications

General

Brand	Manitowoc
Model	Grove GMK 4100L-1
Category	Construction Equipment
Language	English