EasyManuals Logo
Home>Manitowoc>Construction Equipment>Grove GMK 4100L-1

Manitowoc Grove GMK 4100L-1 User Manual

Manitowoc Grove GMK 4100L-1
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Maintenance work on the carrier
7.5 Exhaust system with exhaust emission control
25.11.2016
Maintenance manual 3 302 364 en 7 - 37
GMK 4100L-1
7.5.4 Having the AdBlue system checked
This inspection may only be performed by Manitowoc Crane Care or
an authorised GROVE dealer or an authorised specialist workshop.
• Have the entire AdBlue system checked for leaks and correct operation;
Overview, p. 7 - 33.
• Also observe the information on the components mounted on the engine;
à Engine manufacturer’s documentation:
– AdBlue dosing unit,
– Solenoid valve for engine coolant for preheating the AdBlue tank.
Maintenance interval for the pump unit
The engine manufacturer specifies additional maintenance intervals for
the pump unit (1);
à Engine manufacturer’s documentation.
AdBlue filter
• Have the AdBlue filter in the pump unit (1)
changed:
– for the first time after one year (M 12),
– after that, every two years (Y 2).
Pressure accumulator
• Have the pressure accumulator in the pump
unit (1) filled:
– for the first time after one year (M 12),
– after that, every two years (Y 2).
• Have the insulation hood (2) checked for damage and for tight fitting
on the AdBlue tank. The insulation hood prevents the AdBlue tank
freezing up.
• Have the electrically heated AdBlue cables at the pump unit (1) checked
for correct operation.
s
M 12

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Grove GMK 4100L-1 and is the answer not in the manual?

Manitowoc Grove GMK 4100L-1 Specifications

General IconGeneral
BrandManitowoc
ModelGrove GMK 4100L-1
CategoryConstruction Equipment
LanguageEnglish

Related product manuals