Maintenance work on the carrier
7.1 General instructions
25.11.2016
Maintenance manual 3 302 364 en 7 - 1
GMK 4100L-1
7 Maintenance work on the carrier
7.1 General instructions
The truck crane GMK 4100L-1 is fitted as
standard with an
AdBlue system for exhaust gas
emission control. In this case an AdBlue tank (1)
fitted to the truck crane;
à p. 7 - 33.
An engine that can be operated at the
respective p
lace of use without an
AdBlue
system
is available, but only as special
equipment. In that case there is no AdBlue
tank (1) fitted to the truck crane. The relevant
maintenance work does not arise;
à Exhaust
system with exhaust emission control
, p. 7 - 33.
7.1.1 Covers
Various types of work (e.g. oil change) require that covers be removed.
Before maintenance work
• Remove the covers (1)
• Remove the covers (2) only if you are
performing general work on the engine and
you need improved access to the engine.
After maintenance work
• Fasten the covers (1) and (2) with the
catches.