Maintenance work on the carrier
7.6 Transmission
13.02.2018
Maintenance manual 3 302 719 en 7 - 43
GMK6300L-1
Topping up oil
• Top up the oil via the dipstick tube (2).
• Wait so that the oil is evenly distributed in
the transmission.
• Use the dipstick (1) to check whether the oil
level is clearly above the mark (3), otherwise
the engine may not be started.
• Insert the dipstick into the dipstick tube.
• Allow the engine to run at idling speed in the
neutral position N so that the oil can be
evenly distributed in the transmission and
in the oil cooler.
Checking
• Check the oil level when the gear oil is cold; à p. 7 - 38.
• Check the transmission for leaks on the caps of the oil filters and at the oil
drain plug.
• Check the oil level when the gear oil is warm; à p. 7 - 39.
G
Risk of accidents when searching for leaks under the truck crane!
Ensure that the parking brake is engaged before you go underneath
the t
ruck crane to search for leaks.
Keep away from rotating parts.
To Next Page
Loading...
Need help?
General
