Maintenance work on the superstructure
8.3 Engine
13.02.2018
Maintenance manual 3 302 719 en 8 - 21
GMK6300L-1
8.3.7 Changing the oil and the oil filter
Oil, spare parts,
tools
– Receptacle, approx. 30 ltr (8 gal);
à p. 2 - 4.
– Torque wrench for a torque of 50 Nm (36 lbf ft).
– Connecting piece and hose (tool box);
à p. 7 - 92.
Prerequisites
• Find out the prescribed oil specification and about the need to shorten
the maintenance interval under special operating conditions;
à Engine
manufacturer’s documentation
.
• Find out about the safety instructions and the sequence of steps to change
the oil and the oil filter;
à Engine manufacturer’s documentation.
– The truck crane must be level.
– The main boom must be raised;
à Manual de instrucciones.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Engine oil in
litres (gal)
Designation
according to
DIN 51502
Specification
Classification
GROVE part no.
29 (7.6) HD - CD MIL-L 2104 C
DB 228.31/.51
SAE 5 W-30
03329588
Designation Quantity GROVE part no.
Oil filter with gasket 1 04165291
To Next Page
Loading...
