Maintenance work on the carrier
7.19 Other maintenance work
7 - 126 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
7.19.5 Lubricating the connecting and socket pins
Grease, tools
–Brush.
Checking Depending on the equipment, there are various connecting and socket pins
on the
carrier su
ch as:
– Fastenings to hold the hook block on the bumper while driving on
the
road
– Clamps for ladders on the carrier
– Hinged warning panels under the bumper,
– Fastenings for the outrigger pads and socket pins on the outrigger,
– Locks on the removable covers,
– Hinges on the doors and covers of the storage box.
• Check the pins for wear such as rust, deformation, broken clips, chains
and pin-type keepers.
• If the pins are damaged, have them replaced by Manitowoc Crane Care
or an authorised GROVE dealer or your qualified repair crew.
• Use only authentic replacement pins.
Lubricating
• Clean the pins.
• Lubricate the pins with a brush.
Lubricating
grease
Designation
according to
DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369
To Next Page
Loading...
