Maintenance work on the carrier
7.3 Engine
13.02.2018
Maintenance manual 3 302 719 en 7 - 11
GMK6300L-1
7.3 Engine
• In addition, carry out further maintenance work specified in the
Engine manufacturer’s documentation supplied.
7.3.1 Checking the oil level
Prerequisites – The truck crane must be level.
Checking the
oil leve
l
• Start the engine.
• Switch off the engine immediately, if
– the symbol STOP is displayed,
– the symbol Oil can is displayed,
–
and the warning buzzer sounds.
If these symbols are displayed, the oil pressure is too low.
• Allow the engine to run at idling speed for 2-3 minutes.
• Switch the engine off.
• Check the oil level after about 2 minutes.
s
S
Risk of damage to the engine if the oil pressure is too low.
If one of the symbols STOP or Oil can is displayed and
the warning buzzer
sounds, switch off the engine immediately.
Running the engine when the oil pressure is too low can damage it.
To Next Page
Loading...
Need help?
General
