Maintenance work on the superstructure
8.11 Hoist ropes
13.02.2018
Maintenance manual 3 302 719 en 8 - 91
GMK6300L-1
8.11.3 Lubricating the hoist rope
Grease, spare
parts and tools
– Brush, roller, spray gun, tray or pressure pump.
Lubricating the
rope
– lubricating the rope
– significantly prolongs its service life and
– keeps the friction between the rope, the sheaves and the hoist drum
as low as p
ossible.
The lubricant is applied to the rope by
– spraying, brushing, rolling or
– by running it through a tray filled with lubricant or
– by means of high-pressure lubrication with a pressure pump.
H
The Manitowoc Crane Group Germany GmbH recommends high-pressure
lubrication with a pressure pump (GROVE part no. 90018525) for reasons
of sustainability, efficiency and environmental protection.
When lubricating the hoist ropes, observe the instructions concerning
the lub
ricant.
When using the pressure pump, observe the manufacturer's separate
operating instructions.
For further information, contact
Manitowoc Crane Care or an authorised
GROVE dealer.
Designation Quantity GROVE part no.
Grease 1 03133770
To Next Page
Loading...
