Maintenance work on the superstructure
8.8 Slewing bearing
8 - 58 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
8.8.2 Lubricating the gear teeth
Grease
H
Observe the instructions and safety instructions on the adhesive lubricating
grease packaging.
Prerequisites – The truck crane must be level and on outriggers;
à Manual de
instrucciones
.
– The main boom must be fully raised;
à Manual de instrucciones.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Lubricating
A distinction is made between initial lubrication and subsequent
lubrications:
Designation Quantity GROVE part no.
Adhesive lubricating grease (spray can) 1 00554205
G
Risk of crushing from the gear teeth.
Fingers may be crushed or clothing can be drawn into the open, rotating
pinion. For this reason, be sure to remount the plate after lubricating.
To Next Page
Loading...
Need help?
General
